Before You Begin

Mapping the O: drive is important when it is necessary to access, save, and share department files.  Computers on campus connected to the Wolftech domain map the drive automatically.  Those not on the domain will have to map the drive manually.  This page will outline the basic steps on how to do this.

When using Windows to map the drive, it will be necessary have the university's VPN client software installed and running on the machine beforehand.  If you plan on mapping the O: drive frequently, or having Windows map the drive automatically each time you log on, you should configure the settings of the VPN client such that it will run immediately after logging in. This will ensure that the drive maps successfully.

Note. If you do not wish to map your O: drive using the operating system, but would rather use an alternative method, you can download ExpanDrive. When using this method, however, you will need to make sure that you change your password in ExpanDrive every time your Unity password is changed. Otherwise, it will fail to function properly.  To learn how to download and use ExpanDrive to map your O: Drive, see the corresponding FAQs page here.

Mapping the O: Drive

                                                      Fig. 1

To map your O: drive, click on the Start button, and right-click on Computer. Then, select Map network drive from the drop-down menu (Fig. 1).

                                                       Fig. 2

When the "Map Network Drive" window appears (Fig. 2), click on the drop-down menu next to Drive, and select O:

Fig. 3

In the text box next to Folder, you can type in the server path for the mapped drive (Fig. 3).  In this case, \\wolftech.ad.ncsu.edu\chass\departments\Business Center. Note Business Center has a space between Business and Center. 

It is recommended that you leave Reconnect at logon deselected. If you decide to have Windows re-map the drives upon logon, you may encounter an error message. You will want to make sure that the VPN client is sent to run automatically, and that you enter in your UNITY ID and password. Once the client makes a successful connection with the server, another attempt to connect to the previously mapped drives can be made.

Then, select Connect using different credentials, which will prompt you to enter your Unity ID and password rather than using that of your local machine's user account. If this option is NOT selected, Windows will attempt to map the drives using the account credentials of your local machine rather than your Unity ID and password. If this occurs five times in succession, it will result in your account being locked out.

To initiate the connection, click Finish.

Fig. 4

If you have already mapped the M: drive, and have entered your Unity ID and Password, you will only be prompted to enter in your password. In case you haven't, the figure above (Fig. 11) also details how you would enter in your Unity ID. When doing so, you must first type wolftech\ and then enter your Unity ID after the final backslash.

It is important to leave Remember my credentials unchecked.

Click OK when finished.

Your O: drive should then be successfully mapped, appearing in its own separate window 

Note. As indicated above, an alternate method for mapping the O: drive is also available using ExpanDrive.